Description
Model Description
| SGP1 — 32 D S H J— L *** | ||
| ① ② ③ ④ ⑤⑥⑦ ⑧ ⑨ |
| ① SGP1 Series | 3.UNF screw thread | |
| ② Mounting spigot diameter | S: Inlet M27*2 Outlet M22*15 | |
| 一:Φ82; A:Φ82.55 | S1(A type port apply to the displacement of 30、32、36) | |
| C: Φ80 B:Φ85 | Inlet： M33*2 Outlet:M27*2 | |
| ③Nominal displacement (mL/r) | 9.Special | |
| 19、23、25、27、30、32、36 | ⑥Mounting | |
| ④ Position of ports | H:Horizontal 2 bolts: 106 | |
| D.Rear port | H1:Horizontal 2 bolts: 130 | |
| F.Side port (on cover rear) | ⑦Shaft type | |
| A.Side port (on body) | 1. SAE spline： 16/32DP, Teeth No.: 13,Length:42 | |
| ⑤ Port configuration | 2.flat key (dia.Φ 20) | |
| 1. SAE flange port (side only) | 5.SAE spline: 16/32DP,Teeth No.:10,Length:33 | |
| Inlet: Φ25; 52.4*26.2; 4-M10*1.25 | H. Rectangle spline: 6-20*16*4, Length: 70 | |
| Outlet:Φ20; 47.6*22.2; 4-M10*1.25 | H1. Rectangle spline: 6-20*16*4, Length: 41.5 | |
| 2. G screw thread (JISB2351) same as PF | 9.Special | |
| Inlet: G1 | ⑧Direction of rotation ( from shaft end) | |
| Outlet: G1/2. G3/4 | L:Left rotation (counterclockwise) | |
| R:Right rotation (clockwise) | ||
| ⑨Code number | ||
Performance parameters
| Models | Nominal displacement (mL/r) | Pressure (Mpa) | Rotation speed (r/min) | Volumetric Efficiency（≥%) | L | Weight (kg) | |||
| Rated | Max | Min | Rated | Max | |||||
| SGP1-19 | 19 | 20 | 25 | 600 | 2500 | 3000 | 92 | 115.5 | 4.1 |
| SGP1-23 | 23 | 118.5 | 4.3 | ||||||
| SGP1-25 | 25 | 122.5 | 4.6 | ||||||
| SGP1-27 | 27 | 124.5 | 4.8 | ||||||
| SGP1-30 | 30 | 126.5 | 5.0 | ||||||
| SGP1-32 | 32 | 131.5 | 5.4 | ||||||
| SGP1-36 | 36 | 130.5 | 5.8 | ||||||
Oil port position
Rear Port
| Displacement | 23 | 25 | 27 | 30 | 32 | 36 |
| A1 | 117 | 118 | 122 | 124 | 128 | 132 |
Reviews
There are no reviews yet.